This is an old revision of the document!
RepeaterBookConnect allows the RepeaterBook app to connect to and control certain amateur radio transceivers. Initially, the app is designed to allow the app to transfer repeater channels from the app to the transceiver with the touch of the screen.
The RepeaterBookConnect program is a premium upgrade to the app requiring a fee to enable the functionality in the app.
RepeaterBookConnect will control the “B” band of the radio. If the radio is not in dual-band mode, RepeaterBookConnect will first set it to dual-band mode and set the control and PTT band to the “B” side, which is the right side.
The B Band must be in the correct Band mode to accept the chosen frequency. If it is not, the command will be ignored. For example, if you wish to set a repeater with a frequency of 146.730 MHz, the B Band must be in the 144 MHz mode.
To change the band mode, press the F key followed by the pushing down on the right volume knob. Repeater this process until the radio is in the desired band.
To use the RepeaterBookConnect on the TH-D74
On the D74 Ensure the radio is in pairing mode
Select D74 from Settings, Radio, D74
Features
Limitations