User Tools

Site Tools


uplink_frequency

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision Both sides next revision
uplink_frequency [2019/02/10 21:30]
kd6kpc created
uplink_frequency [2019/02/10 21:30]
kd6kpc
Line 1: Line 1:
-====== UplinkFrequency ======+====== Uplink Frequency ======
 To reduce confusion as to which frequency is being referenced in terms of a paired frequency set (duplex with separate input and output frequencies, as repeaters typically use, the uplink frequency refers to the frequency that the repeater is receiving on. This is the frequency that is programmed into the user radio (HT, mobile, base) that you transmit to the repeater on. This is the radio's transmit frequency. Some radios are wquipeed with automatic offset and the user does not actually program in a transmit frequency, but simply indicates if the repeater is a positive (+) or negative (-) shift. To reduce confusion as to which frequency is being referenced in terms of a paired frequency set (duplex with separate input and output frequencies, as repeaters typically use, the uplink frequency refers to the frequency that the repeater is receiving on. This is the frequency that is programmed into the user radio (HT, mobile, base) that you transmit to the repeater on. This is the radio's transmit frequency. Some radios are wquipeed with automatic offset and the user does not actually program in a transmit frequency, but simply indicates if the repeater is a positive (+) or negative (-) shift.
  
uplink_frequency.txt ยท Last modified: 2021/02/27 14:11 (external edit)