RepeaterBook Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== N0GSG Contact Manager ======
DMR Contact Manager is a custom-designed software package designed for use with Connect Systems CS700/CS701/CS750/CS800/CS801/CS800D radios, as well as the Tytera MD-380/390/390GPS, TYT MD2017/MD9600, AnyTone AT-D868UV and AT-D858, Retevis RT3, and similar radios that use the RDT/RDB file formats. These units are MOTOTRBO-compatible DMR mobile radios suitable for both commercial and amateur radio applications.

[[http://n0gsg.com/contact-manager/|Website]]

===== Contacts =====

  * [[https://www.repeaterbook.com/repeaters/downloads/nogsg.talkgroup_export_file.php?cps=868&type=BM|Create Contact List with Brandmeister Groups]]
  * [[https://www.repeaterbook.com/repeaters/downloads/nogsg/talkgroup_export_file.php?cps=868&type=Moto|Create Contact List with DMR-MARC Talk Groups]]


===== Channel Editor CSV =====
There is no information on the Contact Manager Website about the *.csv export/import files. I have made an attempt to determine what each column is used for. On the exported CSV file, there are no column headers.

^ Field ^ Values ^ Notes ^
| Channel Name | | Cannot use the following characters: - |
| Mode | FM, DMR | |
| Bandwidth (kHz) | 12.5, 25 | DMR is always 12.5. |
| TX Frequency (MHz) | | Uplink Frequency|
| RX Frequency (MHz) | | Downlink Frequency |
| Scan List | | If none, then enter -NULL- |
| Squelch | TIGHT, NORMAL | Default to NORMAL |
| Admit Criterion | Always, Color Code Free, CTCSS/CDCSS, Audio | Use Always for analog and Color Code Free for DMR. |
| RX Ref Freq | Low, Medium, High | |
| | Low, Medium, High| |
| Transmitter Time-Out | | |
| TOT Rekey Delay | 0-255 | Default is 0. |
| Power | LOW, MID, HIGH | Default is HIGH. | 
| Auto Scan | Yes, No | Default is No. |
| Rx Only | Yes, No | Default is No. |
| | Yes, No | Default is No. |
| | Yes, No | Default is No. |
| Talk Around | Yes, No | |
| CTCSS / DCS Decode |  |  |
| CTCSS / DCS Encode | | |
| QT Reverse | 120, 180 | |
| Tx Signaling System | ON, OFF  | Default to OFF. |
| Rx Signaling System | ON, OFF  | Default to OFF. |
|  | YES, NO | Default to NO. |
|  | YES, NO | Default to NO. |
|  | YES, NO | Default to NO. |
|  | YES, NO | Default to NO. |
|  | YES, NO | Default to NO. |
|  | YES, NO | Default to NO. |
|  | YES, NO | Default to NO. |
|  | YES, NO | Default to NO. |
|  | YES, NO | Default to NO. |
| Private Call Confirmed  | YES, NO | Yes = The radio sends a confirmed private call request upon private call initiation. No = The radio sends unconfirmed private call request upon private call initiation. |
| Emergency Alarm Acknowledge | YES, NO | |
| Data Call Confirmed | YES, NO | Yes = The radio sends confirmed data call request upon private call initiation. No = The radio sends unconfirmed data call request upon private call initiation. |
| Emergency System | | Default is None. |
| Contact Name (TX) | | Analog default is NONE. |
| Group List | | |
| Color Code | | Analog default is 15. |
| Encryption Privacy | BASIC, NONE | Set to NONE. |
| Encryption Code | 1-16 | Default to 1 |
| TDMA Time Slot | 1-2 | Analog default is 1. |
RepeaterBook Wiki

User Tools

Site Tools

Page Tools
