This is an old revision of the document!
The MCP-D74 is programming software to set up the TH-D74 from your PC.
The Kenwood TH-D74 is a 144/220/430MHz Tri-band Digital Handheld w/APRS & D-Star.
There are three different ways to import data into the MCP-D74 software. Not all are supported by RepeaterBook exports. The three methods include:
Opening a file that can be loaded into the software is accessible from the menu at the top of the application window by selecting File » Open… and can open the following formats:
|TH-D74 MCP-D74 File (*.d74)||No|
|MCP Common File (*.hmk)||Yes|
|TM-D710G MCP-6A File (*.mc6)||No|
|TH-D72 MCP-4A File (*.mc4)||No|
|TM-V71/D710/RC-D710 MCP-2A File (*.mc2)||No|
|TH-F6/F7 MCP-F6/F7 File (*.fx)||No|
|TH-2K/4K, TM-271/471 MCP-1A File (*.mcp)||No|
|TM-D700 MCP-D700 File (*.700)||No|
|TH-G71A (K-type) MCP-G71 File (*.71)||No|
|TH-D7 MCP-D7 File (*.d7)||No|
|TH-D7G MCP-D7G Gile (*.d7g)||No|
|TM-G707A (K-type) MCP-G707 File (*.707||No|
|TM-V7A (K-type) MCP-V7 File (*.V7)||No|
|TS-2000/TS-B2000 MCP-2000 File (*.2k0||No|
The Memory Channel import is accessible from the menu at the top of the application window by selecting File » Import… and can import in the following formats:
TravelPlus support status can be found on the TravelPlus Wiki Page.
The Repeater List import is available when selecting “Repeater List” from the tree view and selecting “Import Repeater Lists from File… at the bottom of the application window and can import in the following format:
RepeaterBook has not been able to support the Repeater List File (*.tsv) due to the use of Kenwood's extinct encoding process. Both the encoding to the software and to the SD Card are using UCS-2 LE BOM. RepeaterBook can only encode in UTF-8.