This is an old revision of the document!
MCP (Memory Control Program)
The MCP-2A software can accept three types of file exports from Repeaterbook.com.
The HMK file exports the following headers: Ch: Channel number -
Rx Freq.: Downlink (Receive) Frequency -
Rx Step: Receive Channel Step -
Offset: Repeater Offset -
T/CT/DCS: Uplink Tone Type -
TO Freq.: Uplink (Transmit) Tone Frequency - Repeater's value or 77.0.
CT Freq.: Downlink (Receive) CTCSS Frequency - Repeater's value or 88.5
DCS Code: Digital Coded Squelch Code - Repeater's value or 023.
Shift/Split: Repeater Shift Direction - “+” or “-”.
Rev.: Repeater Reverse - Default is Off.
L.Out: Transmit Lockout - Default is Off.
Mode: Modulation Mode - Always FM
Tx Freq.: Transmit (Uplink) Frequency
Tx Step: Bandplan correct.
M.Name: Repeater call sign.