Table of Contents

Anytone AT-D868UV CPS

To see information on the data for the radio, please refer to Anytone AT-D868UV Digital DMR Dual-Band Handheld Commercial Radio.

The current version of the CPS software can be downloaded here, courtesy of BridgeCom System.

The RepeaterBook export has been tested with version 1.39 CPS.

Supported Searches

Search Page North America Rest of World
Advanced State Search Operational In Development
Call In Development In Development
Favorite Operational In Development
Feature Operational Operational
Keyword Operational Operational
Location Operational Operational
Multi-County In Development
Multi-State In Development
Proximity Operational Operational
Quick Operational Operational
Nationwide In Development
Special Modes Operational Operational
Travel Operational

Import/Export Fields

Default value in BOLD.

Field Name Value
No. Channel Number. Starts at 1 and auto-increments.
Channel Name The callsign followed by the nearest city and landmark. Truncates at 16 characters.
Receive Frequency Downlink frequency.
Transmit Frequency Uplink frequency.
Channel TypeA-Analog for an analog-only channel (default for analog channels), D-Digital for a digital-only channel (default for DMR channels), A+D TX A for mixed analog (allow receive analog and digital signal, TX is analog), D+A TX D for mixed digital (allow receive of analog and digital signal. TX is digital.)
Transmit Power Low is 0.5 watts, Mid is 1 watt, High is 2.5 watts, Turbo is 6 watts.
Band Width 12.5K is default for DMR repeaters. 25K is the default for analog repeaters.
CTCSS/DCS Decode Repeater downlink tone. If DCS, the letter “N” is appended to the end. “Off” if not applicable.
CTCSS/DCS Encode Repeater uplink tone. If DCS, the letter “N” is appended to the end. “Off” if not applicable.
Contact RB1
Contact Call Type Group Call.
Contact TG/DMR ID 1.
Radio ID Null.
Busy Lock/TX Permit Always, ChannelFree, Different Color Code, Same Color Code (default for DMR repeaters), Off (default for analog repeaters), Repeater, Busy.
Squelch ModeCarrier, CTCSS/DCS
Optional Signal Repeaterbook defaults to Off.
DTMF ID 1.
2Tone ID 1.
5Tone ID 1.
PTT ID Off.
Color Code For DMR it is the repeater's color code. For analog, Repeaterbook defaults to 1.
Slot 1.
CH Scan List None.
Receive Group List None.
TX Prohibit Off.
Reverse Off.
Simplex TDMA Off.
TDMA Adaptive Off.
Encryption Type Normal Encryption.
Digital Encryption Off.
Call Confirmation Off.
Talk Around On.
Work Alone Off.
Custom CTCSS 251.1.
2Tone Decode 0.
Ranging Off.
Through Mode Off.
APRS Report Off.
APRS Report Channel 1.

Export Notes

This radio can only transmit and receive in analog FM and DMR modes. All other modes are automatically filtered out except when other modes are specifically selected.

This automatic filtering of unsupported modes may cause a discrepancy between the number of rows shown in the search results versus what is exported.

Help