The Kenwood (*.hmk) file is a common file type between all Kenwood radios that utilize the MCP series of software programming utilities.
| Search Page | North America | Rest of World |
|---|---|---|
| Favorite | Operational | |
| Call | ||
| Feature | Operational | In Development |
| Keyword | In Development | In Development |
| Location | In Development | In Development |
| Multi-County | Not Supported | |
| Multi-State | Not Supported | |
| Proximity | Operational | Testing |
| Quick | Operational | Testing |
| Nationwide | In Development | |
| Special Modes | In Development | In Development |
| Travel | Operational |
Values in BOLD indicate RepeaterBook default value.
| Field Name | Value |
|---|---|
| Ch | Channel number - Memory channel number. Auto-increments starting at 1. |
| Rx Freq. | Downlink (Receive) Frequency |
| Rx Step | Receive Channel Step |
| Offset | Repeater Offset |
| T/CT/DCS | Uplink Tone Type - T = Uplink tone only. CT = Uplink and Downlink Tone. DCS is digital squelch. |
| TO Freq. | Uplink (Transmit) Tone Frequency - Repeater's value or 77.0. |
| CT Freq. | Downlink (Receive) CTCSS Frequency - Repeater's value or 88.5. |
| DCS Code | Digital Coded Squelch Code - Repeater's value or 023. |
| Shift/Split | Repeater Shift Direction - “+” or “-”. |
| Rev. | Repeater Reverse - Off. |
| L.Out | Transmit Lockout - Off. |
| Mode | Modulation Mode - FM |
| Tx Freq. | Transmit (Uplink) Frequency |
| Tx Step | Bandplan correct. |
| M.Name | Memory Channel Name - Repeater call sign. |