Table of Contents
Anytone AT-D878UV, AT-D878UV Plus, AT-878UVII, AT-878UVII PLUS CPS
The current version of the CPS software can be downloaded downloaded, courtesy of Anytone.
The RepeaterBook export seems to be working to import into all of the following Anytone CPS:
- AT-D578UV CPS version 1.13 - 1.16.
- AT-D878UV and AT-D878UV Plus with CPS versions 1.16 - 1.39.
- AT-D878UVII and AT-D878UVII Plus with CPS version 2.x - 3.x.
Supported Searches
| Search Page | North America | Rest of World | |
|---|---|---|---|
| Advanced State Search | Operational | In Development | |
| Call | In Development | In Development | |
| Favorite | Operational | Operational | |
| Feature | Operational | Operational | |
| Keyword | Operational | Operational | |
| Location | Operational | Operational | |
| Multi-County | In Development | ||
| Multi-State | Operational | ||
| Proximity | Operational | Operational | |
| Proximity 2.0 | Operational | ||
| Quick | Operational | Operational | |
| Nationwide | Not Supported | ||
| Special Modes | Operational | Operational | |
| Travel | Operational |
Import/Export Fields
Default value in BOLD.
| Field | Value | Revision |
|---|---|---|
| No. | Channel Number. Starts at 1 and auto-increments. | |
| Channel Name | User can choose data to populate with. | |
| Receive Frequency | Downlink frequency. | |
| Transmit Frequency | Uplink frequency. | |
| Channel Type | A-Analog for an analog-only channel (default for analog channels), D-Digital for a digital-only channel (default for DMR channels), A+D TX A for mixed analog (allow receive analog and digital signal, TX is analog), D+A TX D for mixed digital (allow receive of analog and digital signal. TX is digital.) | |
| Transmit Power | Low is 0.5 watts, Mid is 1 watt, High is 2.5 watts, Turbo is 6 watts. | |
| Band Width | 12.5K is default for DMR repeaters. 25K is the default for analog repeaters. | |
| CTCSS/DCS Encode | Repeater uplink tone. If DCS, the letter “N” is appended to the end. “Off” if not applicable. | |
| CTCSS/DCS Decode | Repeater downlink tone. If DCS, the letter “N” is appended to the end. “Off” if not applicable. | |
| Contact | RB1 | |
| Contact Call Type | Group Call. | |
| Contact TG/DMR ID | 1. | |
| Radio ID | Radio 1. Please change this to your DMR ID after importing. | |
| Busy Lock/TX Permit | Always, ChannelFree, Different Color Code, Same Color Code (default for DMR repeaters), Off (default for analog repeaters), Repeater, Busy. | |
| Squelch Mode | Carrier, CTCSS/DCS | |
| Optional Signal | Off. | |
| DTMF ID | 1. | |
| 2Tone ID | 1. | |
| 5Tone ID | 1. | |
| PTT ID | Off. | |
| Color Code | For DMR, it is the repeater's color code. For analog, Repeaterbook defaults to 1. | |
| Slot | 1. | |
| Scan List | None. | |
| Receive Group List | None. | |
| PTT Prohibit | Off. | |
| Reverse | Off. | |
| Simplex TDMA | Off. | |
| Slot Suit | Off. | |
| AES Digital Encryption | Normal Encryption. | |
| Digital Encryption | Off. | |
| Call Confirmation | Off. | |
| Talk Around(Simplex) | Off. | |
| Work Alone | Off. | |
| Custom CTCSS | 251.1. | |
| 2Tone Decode | 0. | |
| Ranging | Off. | |
| Through Mode | Off. | |
| Digi APRS RX | Off. | |
| Analog APRS PTT Mode | Off. | |
| Digital APRS PTT Mode | Off. | |
| APRS Report Type | Off. | |
| Digital APRS Report Channel | 1. | |
| Correct Frequency[Hz] | 0. | |
| SMS Confirmation | Off. | |
| Exclude channel from roaming | 0. | |
| DMR MODE | Simplex = 1, Repeater = 1, Double Slot = 2. Default to 0. | |
| DataACK Disable | 0. | |
| R5ToneBot | 0. | |
| R5ToneEot | 0. | |
| Auto Scan | 0. | v3.x |
| Ana Aprs Mute | 0 | v3.x |
| Send Talker Alias | 0 | v3.x |
| AnaAprsTxPath | 0 | v3.x |
| ARC4 | 0 | v3.x |
| ex_emg_kind | 0 | v3.x |
Export Notes
This radio can only transmit and receive in analog FM and DMR modes. All other modes are automatically filtered out except when other modes are specifically selected.
This automatic filtering of unsupported modes may cause a discrepancy between the number of rows shown in the search results versus what is exported.