====== Anytone AT-D868UV CPS ======
{{:radios:d868uv.jpg?400|}}
To see information on the data for the radio, please refer to [[radios:anytone_d868uv|Anytone AT-D868UV Digital DMR Dual-Band Handheld Commercial Radio]].
The current version of the CPS software can be downloaded [[https://support.bridgecomsystems.com/anytone-868-handheld-cps-firmware-and-driver-downloads|here]], courtesy of BridgeCom System.
The RepeaterBook export has been tested with version 1.39 CPS.
===== Supported Searches =====
^ Search Page ^ North America ^ Rest of World ^
| Advanced State Search | Operational | In Development |
| Call | In Development | In Development |
| Favorite | Operational | In Development |
| Feature | Operational |Operational |
| Keyword | Operational |Operational |
| Location | Operational| Operational |
| Multi-County | In Development | |
| Multi-State | In Development | |
| Proximity | Operational| Operational|
| Quick | Operational| Operational|
| Nationwide | In Development | |
| Special Modes | Operational| Operational|
| Travel | Operational | |
=====Import/Export Fields=====
Default value in **BOLD**.
^Field Name ^ Value |
|No. |Channel Number. Starts at 1 and auto-increments. |
|Channel Name| The callsign followed by the nearest city and landmark. Truncates at 16 characters. |
|Receive Frequency| Downlink frequency. |
|Transmit Frequency| Uplink frequency. |
|Channel Type|A-Analog for an analog-only channel (default for analog channels), D-Digital for a digital-only channel (default for DMR channels), A+D TX A for mixed analog (allow receive analog and digital signal, TX is analog), D+A TX D for mixed digital (allow receive of analog and digital signal. TX is digital.)|
|Transmit Power| Low is 0.5 watts, Mid is 1 watt, **High is 2.5 watts**, Turbo is 6 watts.|
|Band Width| 12.5K is default for DMR repeaters. 25K is the default for analog repeaters.|
|CTCSS/DCS Decode| Repeater downlink tone. If DCS, the letter "N" is appended to the end. "Off" if not applicable.|
|CTCSS/DCS Encode| Repeater uplink tone. If DCS, the letter "N" is appended to the end. "Off" if not applicable. |
|Contact| **RB1**|
|Contact Call Type| Group Call.|
|Contact TG/DMR ID| **1**.|
|Radio ID| **Null**.|
|Busy Lock/TX Permit| Always, ChannelFree, Different Color Code, Same Color Code (default for DMR repeaters), Off (default for analog repeaters), Repeater, Busy.|
|Squelch Mode|Carrier, CTCSS/DCS|
|Optional Signal| Repeaterbook defaults to **Off**.|
|DTMF ID| **1**.|
|2Tone ID| **1**.|
|5Tone ID| **1**.|
|PTT ID| **Off**.|
|Color Code| For DMR it is the repeater's color code. For analog, Repeaterbook defaults to **1**.|
|Slot| **1**.|
|CH Scan List| **None**.|
|Receive Group List| **None**.|
|TX Prohibit| **Off**.|
|Reverse| **Off**.|
|Simplex TDMA| **Off**.|
|TDMA Adaptive| **Off**.|
|Encryption Type| **Normal Encryption**.|
|Digital Encryption| **Off**.|
|Call Confirmation| **Off**.|
|Talk Around| **On**.|
|Work Alone| **Off**.|
|Custom CTCSS| **251.1**.|
|2Tone Decode| **0**.|
|Ranging| **Off**.|
|Through Mode| **Off**.|
|APRS Report| **Off**.|
|APRS Report Channel| **1**.|
=====Export Notes=====
This radio can only transmit and receive in analog FM and DMR modes. All other modes are automatically filtered out except when other modes are specifically selected.
This automatic filtering of unsupported modes may cause a discrepancy between the number of rows shown in the search results versus what is exported.
===== Help =====
* [[https://youtu.be/t-6HrOHMIk0|Repeaterbook YouTube Tutorial]]
* [[https://w9lw.farlowconsulting.com/wp-content/uploads/2020/12/Creating-your-first-AT-D878UV-codeplug.pdf|W9LW Codeplug programming guide]]