====== Kenwood HMK File ======

The Kenwood (*.hmk) file is a common file type between all Kenwood radios that utilize the MCP series of software programming utilities.


===== Supported Searches =====

^ Search Page      ^ North America    ^ Rest of World       ^
| Favorite | <color green>Operational</color>  |
| Call | |
| Feature          | <color green>Operational</color>   | In Development      |
| Keyword          | In Development   | In Development      |
| Location         | In Development   | In Development      |
| Multi-County     | Not Supported    |                     |
| Multi-State      | Not Supported    |                     |
| Proximity        | <color green>Operational</color>| Testing|
| Quick            | <color green>Operational</color>      | Testing|
| Nationwide       | In Development   |                     |
| Special Modes    | In Development   | In Development |
| Travel           | <color green>Operational</color> |                     |

===== File Parameters =====

Values in **BOLD** indicate RepeaterBook default value.

^ Field Name ^ Value |
|Ch | Channel number - Memory channel number. Auto-increments starting at 1. |
| Rx Freq.| Downlink (Receive) Frequency |
| Rx Step | Receive Channel Step |
| Offset| Repeater Offset|
| T/CT/DCS| Uplink Tone Type - T = Uplink tone only. CT = Uplink and Downlink Tone. DCS is digital squelch.|
| TO Freq.| Uplink (Transmit) Tone Frequency - Repeater's value or **77.0**.|
| CT Freq.| Downlink (Receive) CTCSS Frequency - Repeater's value or **88.5**.|
| DCS Code| Digital Coded Squelch Code - Repeater's value or **023**.|
| Shift/Split| Repeater Shift Direction - “+” or “-”.|
| Rev.| Repeater Reverse - **Off**.|
| L.Out| Transmit Lockout - **Off**.|
| Mode| Modulation Mode - **FM** |
| Tx Freq.| Transmit (Uplink) Frequency|
| Tx Step| Bandplan correct.|
| M.Name| Memory Channel Name - Repeater call sign.|