====== Icom CS-705 Export ======

The CS-705 is a programming software to set up the [[http://icomamerica.com/en/products/amateur/handheld/705/default.aspx|IC-705]] from your PC.

[[https://www.icomjapan.com/support/firmware_driver/3067/|Software Download]]

[[https://www.icomjapan.com/support/manual/3066/|Instruction Manual]]

The Icom IC-705 is an all-mode radio covering the 6-meter, 2-meter, and 70-cm bands. It can transmit in D-STAR DV, SSB, CW, AM, and FM. Exports to this radio is limited to frequencies below 470 MHz.

The export has been tested with software version 103.

There are a couple of different areas where repeaters can be downloaded. Each area requires a different export format.

  - Memory Channels (500)
  - Repeater List (2,500)

==== Memory Channels ====
Each Memory Channel Group is limited to a maximum number of 100 channels. The total number of memory channels is 500. The total number of groups is 100.
===== Supported Searches =====

^ Search Page      ^ North America    ^ Rest of World       ^
| Favorite         | <color green>Operational</color> | <color green>Operational</color> |     
| Feature          | <color green>Operational</color> | <color green>Operational</color> |
| Keyword          | <color green>Operational</color> | <color green>Operational</color> |
| Location         | <color green>Operational</color> | <color green>Operational</color> |
| Multi-County     | <color red>Not Supported</color> |                     |
| Multi-State      | <color red>Not Supported</color> | <color red>Not Supported</color> |  
| Proximity        | <color green>Operational</color> | <color green>Operational</color> |
| Quick            | <color green>Operational</color> | <color green>Operational</color> |
| Nationwide       | <color orange>In Development</color>  | <color orange>In Development</color> |
| Special Modes    | <color green>Operational</color> | <color green>Operational</color> |
| Travel           | <color green>Operational</color> |                     |


===== Export/Import Parameters =====

__Field Names and Values__
Default in **BOLD**.

^Field Name ^Value      |
|Group No | User Selection |
|Group Name | User Selection |
|CH No      | Auto-increment, beginning with zero (0). |
|Name       | Repeater Location. Limited to 16 characters. |
|SEL        | **OFF** |
|Frequency | Repeater downlink frequency. |
|Dup | Repeater offset direction (duplex). DUP-, DUP+, OFF |
|Offset |Repeater Offset in MHz. |
|Mode | LSB, USB, CW, CW-R, RTTY, RTTY-R, AM, FM, DV, WFM |
|DATA | **OFF**, ON |
|Filter | **1**, 2, 3. |  
|TONE | TONE, TSQL, DTCS, DTCS(T), TONE(T)/DTCS(R), DTCS(T)/TSQL(R), TONE(T)/TSQL(R), OFF |
|Repeater Tone| Repeater Uplink Tone, **88.5**. |
|TSQL Frequency | Repeater Downlink Tone or, **88.5** if none. |
|DTCS Code | DCS Value or **023** if none. |
|DTCS Polarity | **Both N**, TN-RR, TR-RN, Both R |
|DV SQL | **null** |
|DV CSQL Code | **null** | 
|Your Call Sign | **null** |
|RPT1 Call Sign | **null** |
|RPT2 Call Sign | **null** |
|Split | **OFF**, ON |
|Frequency(2) | See Frequnency above. |
|Dup(2) | Same as Dup above. |
|Offset(2) | Same as Offset above. |
|Mode(2) | Same as Mode above. |
|DATA(2) | Same as DATA above. |
|Filter(2) | Same as Filter above. |
|TONE(2) | Same as TONE above. |
|Repeater Tone(2) | Same as Repeater Tone above. |
|TSQL Frequency(2) | Same as TSQL Frequency above. | 
|DTCS Code(2)	| Same as DTCS Code above. |
|DTCS Polarity(2) | Same as DTCS Polarity above. |
|DV SQL(2) |Same as DV SQL above. |	
|DV CSQL Code(2) | Same as DV CSQL above. |	
|Your Call Sign(2) | Same as Your Call Sign above. |
|RPT1 Call Sign(2) | Same as RPT1 Call Sign above. |
|RPT2 Call Sign(2) | Same as RPT2 Call Sign above. |



===== Export Specifications =====

| Standard Memories   |500    |
| Repeater List Length | 2500 |
| Your Call Sign List Length | 300 |
| Name Display Length | 16 |




===== Export Notes =====

Only 100 rows are permitted per memory group. The export is automatically truncated to the first 100 repeaters.