====== Icom CS-31PLUS Export ======


The CS-31PLUS is a programming software to set up the [[http://www.icomamerica.com/en/products/amateur/handheld/ID31A/default.aspx|ID-31A PLUS or ID-31E PLUS]] from your PC.

[[https://www.icomjapan.com/support/firmware_driver/2466/|Software Download]]

[[https://www.icomjapan.com/support/manual/1710/|Instruction Manual]]

The Icom ID-31 is a 70-cm analog and D-Star transceiver. Exports to this radio will be filtered to the 70-cm band, regardless of the search performed.

There are a couple of different areas where repeaters can be downloaded. Each area requires a different export format.

  - Memory Channels (500)
  - Repeater List (700)

==== Memory Channels ====
Each Memory Channel Group is limited to a maximum number of 100 channels. The total number of memory channels is 500. The total number of banks to store the channels in is 27.

==== Repeater List ====

Your radio came preloaded with repeaters in the Repeater List. RepeaterBook recommends saving a copy of the list to your PC in the event you would like to restore it. You can also download a current copy from the Icom site [[https://www.icomjapan.com/support/firmware_driver/?keyword=cs-31plus&open=tab2&type=5#download_result|here]] or go to the same source Icom gets there data at [[http://www.dstarinfo.com/RepeaterDownloads.aspx|dstarinfo.com]].

Those two sources will only serve D-Star-capable repeaters. You can store analog repeaters from Repeaterbook.com using the [[repeater_group_list_generator|Repeater List Generator]].
===== Supported Searches =====

^ Search Page      ^ North America    ^ Rest of World       ^
| Favorite         | <color green>Operational</color> | <color green>Operational</color> |
| Feature          | <color green>Operational</color> | <color green>Operational</color> |
| Keyword          | <color green>Operational</color> | <color green>Operational</color> |
| Location         | <color green>Operational</color> | <color green>Operational</color> |
| Multi-County     | <color orange>In Development</color>    |                     |
| Multi-State      | <color orange>In Development</color>    |                     |
| Proximity        | <color green>Operational</color> | <color green>Operational</color> |
| Quick            | <color green>Operational</color> | <color green>Operational</color>        |
| Nationwide       | <color orange>In Development</color>   |                     |
| Special Modes    | <color green>Operational</color> | <color green>Operational</color> |
| Travel           | <color green>Operational</color> |                     |


===== Export/Import Parameters =====

^Field Name ^ Value |
|Ch No| Auto-incremented, beginning at 0.|
|Frequency| Repeater downlink frequency.|
| Dup| Off, DUP+, DUP-|
| Offset| Repeaterbook defaults to 5.|
| TS| Repeaterbook defaults to 25kHz.|
| Mode| FM for analog. DV for D-Star.|
| Name| Callsign, nearest city, and landmark. Limited to 16 characters.|
| SKIP| Repeaterbook defaults to Off.|
| TONE| Uplink tone - OFF, TONE, TSQL, TSQL-R, DTCS, DTCS-R, DTCS(T), Tone(T)/DTCS(R), DTCS(T)/TSQL(R), TONE(T)/TSQL(R).|
| Repeater Tone| Uplink tone.|
| TSQL Frequency| Downlink tone.|
| DTCS Code| Uplink digital code.|
|DTCS Polarity| Both N, TN-RR, TR-RN, Both R.|
| DV SQL| OFF, DSQL, CSQL.|
| DV CSQL Code| Repeaterbook defaults to 0.|
|Your Call Sign| Repeaterbook defaults to CQCQCQ.|
| RPT1 Call Sign| Repeaterbook defaults to Null.|
| RPT2 Call Sign| Repeaterbook defaults to Null.|