====== Yaesu ADMS-12 ======

  * [[https://www.yaesu.com/downloadFile.cfm?FileID=16512&FileCatID=42&FileName=FTM%2D300D%5FADMS%2D12%5FENG.zip&FileContentType=application%2Fx%2Dzip%2Dcompressed|Download]]

The Yaesu ADMS-12 software is specifically for programming the [[ftm-300|Yaesu FTM-300DR]] radio. Also, the transceiver parameters and the setup menu items may be edited and configured.

The radio is shipped with a micro-USB cable. This cable is NOT for programming the radio. It is only for performing firmware updates. The cloning cable is the SCU-20 which must be purchased separately.

An alternative and preferred method for programming the radio is with a [[https://amzn.to/3SbeZbg]|microSD card]]. A microSD card is not included with the radio but can be purchased separately.

RepeaterBook recommends a [[https://amzn.to/3SbeZbg]|microSD card no larger than 32 GB]]. The radio is not capable of reading larger cards. The card featured above has been tested in two separate FTM-300DRs and has worked perfectly.

As an alternative to the ADMS-12 software, you can also use the [[https://amzn.to/4d6q7OJ|RT Systems programmer]].

===== Importing / Exporting =====

The software can import and export in the following formats:

  * CSV
  * FTM100D/400D format
  * FT2D format
  * FT3D format


This version of the ADMS software is supported by RepeaterBook. A full list of the supported searches can be found [[adms-12#Supported Searches|below]].

The FTM-300DR supports 999 memory channels.

===== Supported Searches =====

^ Search Page      ^ North America    ^ Rest of World       ^
| **Favorite**         | <color green>Operational</color>| <color green>Operational</color> |
| **Feature**          | <color green>Operational</color>| <color green>Operational</color>|
| **Keyword**          | <color green>Operational</color>| <color green>Operational</color>|
| **Location**         | <color green>Operational</color>| <color green>Operational</color>|
| **Multi-County**     | Development Planned    |                |
| **Multi-State**      | Development Planned   |                     |
| **Proximity**        | <color green>Operational</color>| <color green>Operational</color>|
| **Proximity 2.0**    | <color green>Operational</color> | <color green>Operational</color>|
| **Quick**            | <color green>Operational</color>| <color green>Operational</color>|
| **Travel**           | <color green>Operational</color>| <color green>Operational</color>                    |

===== CSV Format =====

There are no header field names in the file. RepeaterBook defaults are **BOLD**.

^Field Name ^ Field Value|
|Channel No | Sequential beginning with 1 |
|Receive Frequency||
|Offset Frequency| Shift in MHz|
|Offset Direction| -RPT, +RPT, -/+, OFF|
|Operating Mode| AM, **FM**|
|DIG/ANALOG| FM, AMS, DN|
|Name||
|Tone Mode| OFF, TONE, TONE SQL, DCS, REV TONE, PR FREQ, PAGER|
|CTCSS Frequency| Repeater uplink tone or **88.5**|
|DCS Code| Repeater uplink DCS Code or **023**|
|User CTCSS| **1600 Hz** |
|RX DG-ID| Downlink DG-ID or **RX 00**|
|TX DG-ID| Uplink DG-ID or **TX 00**|
|TX Power| **HIGH**, MID, LOW|
|M-GRP| **OFF**|
|SCAN| **YES**, NO|
|Step| **5.0KHz**|
|Narrow|**OFF**|
|Clock Shift|**OFF**|
|Comment||

===== Limitations =====

The RepeaterBook export automatically filters unsupported frequencies and digital modes.

The frequencies exported are between 100 MHz and 1000 Mhz.